Model No. OIA-0001
ICP-OES Used Oil Elemental AnalyzerICP-OES 在用油元素分析仪
- Wavelength range
- 165–800 nm
- Detector
- CCD or CID array
油品分析仪器
Oil Analysis
Photo for reference; configuration may vary by order.
Model No. OIA-0004 · Oil Testing Equipment
Automatic Oil Particle Counter
油液自动颗粒计数器
Hydraulic, turbine and compressor users who certify fluid cleanliness need codes their customers recognise. This counter sizes particles at 4, 6, 14 and 21 µm(c) and finer, with results given as ISO 4406, NAS 1638 or SAE AS4059 classes and calibration traceable to ISO 11171. It handles 1–24,000 particles/mL at 10–100 mL/min, and viscous oils up to 400 mm²/s with dilution.
- Particle size channels
- ≥ 4, 6, 14, 21 µm(c) and finer
- Counting range
- 1–24,000 particles/mL
- Flow rate
- 10–100 mL/min
- Coincidence limit
- ≈ 10,000–24,000 particles/mL
- Oil viscosity range
- 1–400 mm²/s (with dilution)
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
Hydraulic, turbine and compressor users who certify fluid cleanliness need codes their customers recognise. This counter sizes particles at 4, 6, 14 and 21 µm(c) and finer, with results given as ISO 4406, NAS 1638 or SAE AS4059 classes and calibration traceable to ISO 11171. It handles 1–24,000 particles/mL at 10–100 mL/min, and viscous oils up to 400 mm²/s with dilution.
Highlights
- Cleanliness classes in ISO 4406, NAS 1638 or SAE AS4059 format
- ISO 11171 calibration with ISO MTD dust
- Counts 1–24,000 particles/mL at 10–100 mL/min
- Handles oils up to 400 mm²/s using dilution
Applications
- Hydraulic system cleanliness checks
- Turbine and compressor oil monitoring
- Filter efficiency validation
Specifications 技术参数
| Parameter | Value |
|---|---|
| Particle size channels 粒径通道 | ≥ 4, 6, 14, 21 µm(c) and finer |
| Counting range 计数范围 | 1–24,000 particles/mL |
| Flow rate 流速 | 10–100 mL/min |
| Coincidence limit 重合误差上限 | ≈ 10,000–24,000 particles/mL |
| Oil viscosity range 油品黏度范围 | 1–400 mm²/s (with dilution) |
| Sample volume 样品量 | 10–50 mL |
| Calibration 校准 | ISO 11171 (ISO MTD) |
| Cleanliness codes 清洁度等级 | ISO 4406, NAS 1638, SAE AS4059 |
| Power supply 电源 | 220 V AC, 50 Hz |
| Model No. | OIA-0004 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
ASTM D5185
ASTM D6595
ASTM E2412
ASTM D7889
ASTM D7647
ISO 4406
ASTM D664
ASTM D2896
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
5 models
Model No. OIA-0002
Rotating Disk Electrode OES Oil Spectrometer旋转圆盘电极油液光谱仪
- Elements measured
- Fe, Cu, Pb, Al, Cr, Sn, Ni, Si, Na, Zn, P, Ca, Mg and others
- Wavelength range
- 200–480 nm
Model No. OIA-0003
FTIR Oil Condition AnalyzerFTIR 油液状态分析仪
- Spectral range
- 4000–650 cm-1
- Spectral resolution
- 4 cm-1
Model No. OIA-0005
Potentiometric TAN/TBN Titrator for Oil油品酸值碱值电位滴定仪
- Titration modes
- Dynamic, monotonic, preset endpoint
- Burette volume
- 10 mL or 20 mL
Model No. TOT-0005
Interfacial Tension Tester for Insulating Oil绝缘油界面张力测定仪
- Measuring range
- 0–100 mN/m
- Resolution
- 0.01 mN/m