细胞分离系统
Photo for reference; configuration may vary by order.
Model No. CES-0004 · Cell Biology Equipment
浮力激活细胞分离系统
Need untouched monocytes or dendritic cells without columns, magnets or a centrifuge? Antibody-coated microbubbles with density below 1.0 g/cm³ lift unwanted cells to the surface in about 15–30 minutes, leaving targets unlabelled underneath. Each run handles 1–50 mL and 10⁶–10⁹ cells, with purity typically 85–95%.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Need untouched monocytes or dendritic cells without columns, magnets or a centrifuge? Antibody-coated microbubbles with density below 1.0 g/cm³ lift unwanted cells to the surface in about 15–30 minutes, leaving targets unlabelled underneath. Each run handles 1–50 mL and 10⁶–10⁹ cells, with purity typically 85–95%.
| Parameter | Value |
|---|---|
| Separation time 分离时间 | approx. 15–30 min after incubation |
| Sample volume 样品体积 | 1–50 mL |
| Cell number range 细胞数量范围 | 10⁶–10⁹ cells |
| Separation mode 分离模式 | Buoyancy (negative selection depletion) |
| Bubble density 微泡密度 | below 1.0 g/cm³ |
| Purity 纯度 | 85–95% (depletion dependent) |
| Viability 活率 | above 90% (typical) |
| Consumables 耗材 | Antibody-microbubble kits per sample type |
| Buffer 缓冲液 | Cold buffer recommended |
| Dimensions (W x D x H) 外形尺寸（宽 x 深 x 高） | approx. 150 x 150 x 200 mm (rack) |
| Model No. | CES-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
