洁净室配件
Photo for reference; configuration may vary by order.
Model No. CAC-0002 · Cleanroom Equipment
洁净室丁腈手套
Powder-free nitrile gloves for ISO 4–8 work combine chemical resistance with low particle release, below 2000 particles/cm2 at 0.5 μm and above. Finger thickness is 0.08–0.15 mm, length 240–300 mm, with tensile strength of at least 14 MPa and elongation of 500% or more.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Powder-free nitrile gloves for ISO 4–8 work combine chemical resistance with low particle release, below 2000 particles/cm2 at 0.5 μm and above. Finger thickness is 0.08–0.15 mm, length 240–300 mm, with tensile strength of at least 14 MPa and elongation of 500% or more.
| Parameter | Value |
|---|---|
| Material 材质 | Nitrile rubber, powder-free |
| Thickness (finger) 厚度（指部） | 0.08–0.15 mm |
| Length 长度 | 240–300 mm |
| Tensile strength 拉伸强度 | ≥ 14 MPa |
| Elongation at break 断裂伸长率 | ≥ 500 % |
| AQL (pinholes) AQL（针孔） | 1.0 or 1.5 |
| Particle count ≥ 0.5 μm 颗粒数 ≥ 0.5 μm | < 2000 particles/cm2 |
| Cleanroom class suitability 适用洁净度 | ISO 4–8 |
| Sterile option 无菌选项 | Gamma irradiated, SAL 10-6 |
| Sizes 尺寸 | S, M, L, XL |
| Model No. | CAC-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
