Low-Speed Benchtop Centrifuge低速台式离心机
- Maximum speed
- 4,000–5,000 rpm
- Maximum RCF
- 2,500–4,200 x g
高速离心机

Photo for reference; configuration may vary by order.
Model No. HSC-0005 · Laboratory Centrifuges
连续流高速离心机
Pilot-scale harvests of cells, yeast or virus run into tens of litres, too much for batch rotors. This continuous-flow centrifuge spins at 15,000–35,000 rpm (roughly 60,000 × g maximum), processing 10–100 L/h through a bowl holding 0.2–1 L of solids. A peristaltic pump feeds 0.1–2 L/min. Wetted parts are 316L stainless, PTFE and silicone.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Pilot-scale harvests of cells, yeast or virus run into tens of litres, too much for batch rotors. This continuous-flow centrifuge spins at 15,000–35,000 rpm (roughly 60,000 × g maximum), processing 10–100 L/h through a bowl holding 0.2–1 L of solids. A peristaltic pump feeds 0.1–2 L/min. Wetted parts are 316L stainless, PTFE and silicone.
| Parameter | Value |
|---|---|
| Maximum speed 最高转速 | 15,000–35,000 rpm |
| Maximum RCF 最大离心力 | up to approx. 60,000 x g |
| Flow rate range 流速范围 | 0.1–2 L/min |
| Bowl solids capacity 转鼓固体容量 | 0.2–1 L |
| Throughput 处理量 | 10–100 L/h |
| Temperature range 温度范围 | -5 to 30 °C |
| Wetted materials 接液材质 | 316L stainless steel, PTFE, silicone |
| Feed pump 进料泵 | Peristaltic, 0.1–2 L/min |
| Noise level 噪声 | ≤ 68 dB(A) |
| Power supply 电源 | 380 V three-phase, 50 Hz, 3–5 kW |
| Model No. | HSC-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.