排放监测设备
Photo for reference; configuration may vary by order.
Model No. EMM-0001 · Environmental Testing Equipment
抽取式高温湿法多气体烟气连续排放监测系统
Wet scrubber outlets and incinerator stacks carry moisture that would strip soluble gases in a chiller. Keeping probe and line at 180–190 °C, this hot-wet CEMS measures SO2, NO, NO2, CO, CO2, O2 and H2O without drying the sample. Each gas comes with a low and high range; confirm your emission limits so we set them correctly.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Wet scrubber outlets and incinerator stacks carry moisture that would strip soluble gases in a chiller. Keeping probe and line at 180–190 °C, this hot-wet CEMS measures SO2, NO, NO2, CO, CO2, O2 and H2O without drying the sample. Each gas comes with a low and high range; confirm your emission limits so we set them correctly.
| Parameter | Value |
|---|---|
| Measured components 测量组分 | SO2, NO, NO2, CO, CO2, O2, H2O |
| SO2 range SO2 量程 | 0–500 / 0–5000 mg/m³ |
| NOx range NOx 量程 | 0–300 / 0–2000 mg/m³ |
| CO range CO 量程 | 0–200 / 0–5000 mg/m³ |
| O2 range O2 量程 | 0–25 vol% |
| Linearity 线性度 | ≤ ±2% of range |
| Probe and line temperature 探头和管线温度 | 180–190 °C |
| Response time (T90) 响应时间 (T90) | ≤ 120 s |
| Zero and span drift 零点和量程漂移 | ≤ ±2% of range per week |
| Power supply 电源 | 220 VAC, 50 Hz, about 3 kW |
| Model No. | EMM-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
