水力学综合实验台
Photo for reference; configuration may vary by order.
Model No. HBN-0002 · Hydraulics & Fluid Mechanics Lab Equipment
带杠杆秤的称重法水力学综合实验台
Where students must measure small flows to within about one percent, timing a mass of water beats reading a sight tube. This bench uses a 3:1 weigh beam on a 30 kg stainless weighing tank, giving uncertainty better than ±1 % of reading. A 0.55 kW pump delivers up to 1.5 L/s at 24 m head from a 150 L sump.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Where students must measure small flows to within about one percent, timing a mass of water beats reading a sight tube. This bench uses a 3:1 weigh beam on a 30 kg stainless weighing tank, giving uncertainty better than ±1 % of reading. A 0.55 kW pump delivers up to 1.5 L/s at 24 m head from a 150 L sump.
| Parameter | Value |
|---|---|
| Sump tank capacity 储水箱容积 | 150 L |
| Weighing tank 称重水箱 | Stainless steel, 30 kg water capacity |
| Weigh beam ratio 杠杆比 | 3:1 with dump valve |
| Pump 水泵 | Centrifugal, 0.55 kW |
| Maximum head 最大扬程 | 24 m |
| Maximum flow 最大流量 | 1.5 L/s |
| Measurement uncertainty 测量不确定度 | Better than ±1 % of reading |
| Overall dimensions 外形尺寸 | 1200 × 750 × 1050 mm |
| Power supply 电源 | 220 V, 50 Hz |
| Weight (empty) 空载重量 | Approx. 110 kg |
| Model No. | HBN-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
