循环泵
Photo for reference; configuration may vary by order.
Model No. CIP-0002 · Laboratory Pumps
加热循环浴槽
Jacketed reactors, warm columns and viscosity measurements need heated fluid circulated at a steady temperature. This bath heats to 100 °C with ±0.1–0.5 °C stability, 500 W–3 kW of power and 5–30 L volume, pumping 5–25 L/min. Use silicone oil above 90 °C. Over-temperature and low-level cutouts are standard.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Jacketed reactors, warm columns and viscosity measurements need heated fluid circulated at a steady temperature. This bath heats to 100 °C with ±0.1–0.5 °C stability, 500 W–3 kW of power and 5–30 L volume, pumping 5–25 L/min. Use silicone oil above 90 °C. Over-temperature and low-level cutouts are standard.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | Ambient to 100 °C |
| Temperature stability 温度稳定性 | ± 0.1–0.5 °C |
| Heating capacity 加热能力 | 500 W–3 kW |
| Flow rate 流量 | 5–25 L/min |
| Pump pressure 泵压 | Up to 1.5 bar |
| Bath volume 浴槽容积 | 5–30 L |
| Fluid 流体 | Water or silicone oil above 90 °C |
| Safety 安全 | Over-temperature and low-level cutout |
| Controller 控制器 | Digital PID |
| Power supply 供电 | 220–240 V, 50/60 Hz |
| Model No. | CIP-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
