Wet Tank Electroblotting System湿转式电转印槽
- Transfer area (W x L)
- approx. 10 x 7.5 cm (mini) or 15 x 15 cm (midi)
- Gels per run
- 1–2 (up to 4 in large tanks)
电泳电源

Photo for reference; configuration may vary by order.
Model No. POS-0005 · Electrophoresis Equipment
测序和变性胶用高功率电源
Sequencing slabs and denaturing PAGE run best at constant power, which keeps gel temperature and migration steady. This supply reaches 3000 V DC and 400 mA at 100–200 W, with voltage and current limiting. Up to 5 program steps cover pre-run, ramp and run; a single output, timer to 99 h 59 min and ±2% voltage accuracy.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Sequencing slabs and denaturing PAGE run best at constant power, which keeps gel temperature and migration steady. This supply reaches 3000 V DC and 400 mA at 100–200 W, with voltage and current limiting. Up to 5 program steps cover pre-run, ramp and run; a single output, timer to 99 h 59 min and ±2% voltage accuracy.
| Parameter | Value |
|---|---|
| Output voltage 输出电压 | up to 3000 V DC |
| Output current 输出电流 | up to 400 mA |
| Maximum power 最大功率 | 100–200 W |
| Operating modes 运行模式 | Constant power (voltage and current limiting) |
| Programmable steps 可编程步数 | up to 5 (pre-run, ramp, run) |
| Number of outputs 输出路数 | 1 |
| Timer 定时器 | Up to 99 h 59 min |
| Voltage accuracy 电压精度 | ±2% |
| Isolation 隔离 | Floating output with ground-leak detection |
| Power input 电源输入 | 100–240 V AC, 50/60 Hz |
| Model No. | POS-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.