Halogen Moisture Analyzer卤素水分测定仪
- Sample weight range
- 0.5–120 g
- Balance readability
- 1 mg (0.001 g)
分析仪(综合分析仪器)

Photo for reference; configuration may vary by order.
Model No. ANA-0003 · Analytical Instruments
实验室总有机碳(TOC)分析仪
Pharmaceutical water release, cleaning validation and wastewater monitoring all report TOC, but at very different levels. This analyzer spans 4 µg/L to 30000 mg/L, with a choice of 680 °C catalytic combustion or UV-persulfate oxidation and NDIR detection. Each sample takes 3–5 min, and the autosampler holds 40–100 vials. Specify your oxidation preference and sample matrix.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Pharmaceutical water release, cleaning validation and wastewater monitoring all report TOC, but at very different levels. This analyzer spans 4 µg/L to 30000 mg/L, with a choice of 680 °C catalytic combustion or UV-persulfate oxidation and NDIR detection. Each sample takes 3–5 min, and the autosampler holds 40–100 vials. Specify your oxidation preference and sample matrix.
| Parameter | Value |
|---|---|
| Measuring range (TOC) 测量范围(TOC) | 4 µg/L–30000 mg/L |
| Detection limit 检出限 | ≤4 µg/L (high-sensitivity configuration) |
| Oxidation method 氧化方法 | 680 °C catalytic combustion or UV-persulfate |
| Detector 检测器 | Non-dispersive infrared (NDIR) |
| Repeatability 重复性 | RSD ≤2% |
| Analysis time 分析时间 | 3–5 min per sample |
| Autosampler capacity 自动进样器容量 | 40–100 vials |
| Carrier gas 载气 | High-purity oxygen or air, 150–200 mL/min |
| Measured parameters 测量参数 | TOC, NPOC, TC, IC |
| Interfaces 接口 | USB, Ethernet, LIMS export |
| Model No. | ANA-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.