Refrigerated Blood Bank Centrifuge冷冻血库离心机
- Maximum speed
- 5,000 rpm
- Maximum RCF
- 6,000 × g (typical)
临床离心机

Photo for reference; configuration may vary by order.
Model No. CLC-0001 · Clinical Laboratory Equipment
血清分离低速临床离心机
Every collection point needs a reliable centrifuge for gel and clot activator tubes. This swing-out unit reaches 4,000 rpm, about 2,200 × g, holding 6 × 15 mL up to 24 × 7 mL depending on rotor. Speed holds to ±20 rpm, the timer runs 1–99 minutes or continuously, and acceleration and braking have 9 steps.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Every collection point needs a reliable centrifuge for gel and clot activator tubes. This swing-out unit reaches 4,000 rpm, about 2,200 × g, holding 6 × 15 mL up to 24 × 7 mL depending on rotor. Speed holds to ±20 rpm, the timer runs 1–99 minutes or continuously, and acceleration and braking have 9 steps.
| Parameter | Value |
|---|---|
| Maximum speed 最高转速 | 4,000 rpm |
| Maximum RCF 最大 RCF | 2,200 × g (typical) |
| Capacity 容量 | 6 × 15 mL to 24 × 7 mL (rotor dependent) |
| Rotor type 转子类型 | Swing-out |
| Speed accuracy 转速精度 | ±20 rpm |
| Timer 定时器 | 1–99 min, continuous |
| Acceleration/braking 加减速 | Adjustable 1–9 steps |
| Drive 驱动 | Brushless DC motor |
| Noise level 噪音 | ≤ 62 dB(A) |
| Dimensions 外形尺寸 | About 400 × 480 × 350 mm |
| Power supply 电源 | 220 V AC, 50/60 Hz, 400 W |
| Model No. | CLC-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.