水泥水化热测定仪
Photo for reference; configuration may vary by order.
Model No. HHC-0003 · Cement & Mortar Testing Equipment
多通道直接法水化热测定仪
Hydropower and mass-concrete projects often need heat curves for several cements at once. This tester runs 8 vacuum flasks of about 800 g mortar each in a circulating 20 ± 0.1 °C bath for up to 7 days. Pt100 sensors log temperature at 0.01 °C every 1–60 min, and software converts the curves to heat of hydration.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Hydropower and mass-concrete projects often need heat curves for several cements at once. This tester runs 8 vacuum flasks of about 800 g mortar each in a circulating 20 ± 0.1 °C bath for up to 7 days. Pt100 sensors log temperature at 0.01 °C every 1–60 min, and software converts the curves to heat of hydration.
| Parameter | Value |
|---|---|
| Method 方法 | Direct method, insulated vacuum flask |
| Channels 通道数 | 8 |
| Constant-temperature bath 恒温水槽 | 20 ± 0.1 °C, water circulating |
| Temperature sensor 温度传感器 | Pt100, resolution 0.01 °C |
| Mortar sample 砂浆试样 | Approx. 800 g per flask |
| Test duration 测试时长 | Up to 7 days |
| Data recording 数据记录 | Automatic, 1–60 min interval |
| Power 电源 | 220 V, 50 Hz |
| Dimensions 外形尺寸 | 1100 × 600 × 800 mm |
| Model No. | HHC-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
