Anodic Stripping Voltammetry Heavy Metal Analyzer阳极溶出伏安重金属分析仪
- Measuring method
- Anodic stripping voltammetry (SWASV / DPASV)
- Analytes
- Zn, Cd, Pb, Cu (Hg, As optional)
水质分析仪

Photo for reference; configuration may vary by order.
Model No. WQA-0005 · Water Analysis Equipment
水处理厂在线多参数水质分析仪
Finished-water monitoring at a drinking water plant usually needs five readings in one panel: pH, conductivity, turbidity, free chlorine and temperature. This analyzer delivers them continuously from a sample stream of 200–500 mL/min at 0.05–0.5 MPa. It also suits pools, cooling towers and industrial process water. Confirm your sample conditions before ordering.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Finished-water monitoring at a drinking water plant usually needs five readings in one panel: pH, conductivity, turbidity, free chlorine and temperature. This analyzer delivers them continuously from a sample stream of 200–500 mL/min at 0.05–0.5 MPa. It also suits pools, cooling towers and industrial process water. Confirm your sample conditions before ordering.
| Parameter | Value |
|---|---|
| Parameters 参数 | pH, conductivity, turbidity, free chlorine, temperature |
| pH range pH 范围 | 0–14 |
| Conductivity range 电导率范围 | 0–2000 µS/cm |
| Turbidity range 浊度范围 | 0–100 NTU |
| Free chlorine range 游离氯范围 | 0–5 mg/L |
| Sample flow 样品流量 | 200–500 mL/min |
| Sample pressure 样品压力 | 0.05–0.5 MPa |
| Sample temperature 样品温度 | 2–45 °C |
| Outputs 输出 | 4–20 mA, RS-485 Modbus, relays |
| Power supply 电源 | AC 220 V, 50/60 Hz, 60 VA |
| Model No. | WQA-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.