检测仪器
Photo for reference; configuration may vary by order.
Model No. INI-0001 · Industrial Quality Control Equipment
光学投影仪
Tool rooms checking thread forms, gear teeth, stampings, connectors and rubber seal sections still reach for a profile projector. Screens come in 300–500 mm with 10x, 20x, 50x and 100x lenses. The 150 × 50 mm stage reads to 0.001 mm with (3 + L/100) μm accuracy, and angle readout resolves 1 arc minute.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Tool rooms checking thread forms, gear teeth, stampings, connectors and rubber seal sections still reach for a profile projector. Screens come in 300–500 mm with 10x, 20x, 50x and 100x lenses. The 150 × 50 mm stage reads to 0.001 mm with (3 + L/100) μm accuracy, and angle readout resolves 1 arc minute.
| Parameter | Value |
|---|---|
| Screen diameter 屏幕直径 | 300–500 mm |
| Magnifications 放大倍率 | 10x, 20x, 50x, 100x |
| Stage travel (X × Y) 工作台行程（X × Y） | 150 × 50 mm |
| Stage resolution 工作台分辨率 | 0.001 mm |
| Measurement accuracy 测量准确度 | (3 + L/100) μm |
| Magnification accuracy 放大率准确度 | ≤±0.08 % |
| Angle resolution 角度分辨率 | 1 arc minute |
| Maximum part load 最大载重 | ≈15 kg |
| Contour light 轮廓光源 | LED, 24 V |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | INI-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
