塑料组成分析仪
Photo for reference; configuration may vary by order.
Model No. PCA-0003 · Plastic Analysis Equipment
塑料组成分析用裂解气质联用仪
Copolymers, blends, plasticisers, flame retardants and odour sources can be named by breaking a 0.1–2 mg sample apart at 400–800 °C and separating the fragments. Flash or programmed pyrolysis feeds a 30 m capillary column and quadrupole MS covering m/z 10–500. Helium carrier must be at least 99.999%.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Copolymers, blends, plasticisers, flame retardants and odour sources can be named by breaking a 0.1–2 mg sample apart at 400–800 °C and separating the fragments. Flash or programmed pyrolysis feeds a 30 m capillary column and quadrupole MS covering m/z 10–500. Helium carrier must be at least 99.999%.
| Parameter | Value |
|---|---|
| Pyrolysis temperature 裂解温度 | 400–800 °C, programmable |
| Pyrolysis modes 裂解模式 | Flash and programmed |
| Sample mass 样品量 | 0.1–2 mg |
| Column type 色谱柱类型 | Capillary, 30 m, 5% phenyl phase |
| GC oven temperature 色谱柱温范围 | Ambient to 350 °C with programming |
| Mass range 质量范围 | m/z 10–500 |
| Carrier gas 载气 | Helium, ≥ 99.999% |
| Detector 检测器 | Electron ionisation quadrupole |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | PCA-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
