水锤泵实验装置
Photo for reference; configuration may vary by order.
Model No. HRA-0002 · Hydraulics & Fluid Mechanics Lab Equipment
自循环水锤泵试验台（带高位水箱）
Plotting ram efficiency over a range of supply and delivery heads needs a larger, adjustable rig. A 4 m, 32 mm galvanised drive pipe is fed from a header tank set between 0.5 and 1.5 m, and the ram lifts up to 2 L/min to 5 m. Separate tanks measure waste and delivery flow, and a 0.37 kW pump recirculates from a 200 L sump.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Plotting ram efficiency over a range of supply and delivery heads needs a larger, adjustable rig. A 4 m, 32 mm galvanised drive pipe is fed from a header tank set between 0.5 and 1.5 m, and the ram lifts up to 2 L/min to 5 m. Separate tanks measure waste and delivery flow, and a 0.37 kW pump recirculates from a 200 L sump.
| Parameter | Value |
|---|---|
| Drive pipe 驱动管 | Galvanised steel, 32 mm, 4 m |
| Supply head 供水水头 | 0.5–1.5 m, adjustable header tank |
| Delivery head 扬水高度 | Up to 5 m |
| Delivery flow 扬水流量 | Up to 2 L/min |
| Recirculation pump 循环泵 | Centrifugal, 0.37 kW |
| Flow measurement 流量测量 | Two measuring tanks for waste and delivery |
| Pressure gauge 压力表 | Air vessel gauge 0–0.1 MPa |
| Sump tank 储水箱 | 200 L |
| Power supply 电源 | 220 V, 50 Hz |
| Model No. | HRA-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
