半自动生化分析仪
Photo for reference; configuration may vary by order.
Model No. SEM-0003 · Clinical Chemistry Analyzers
内置温育器的半自动生化分析仪
Clinics without a separate water bath can pre-warm and time tubes right on the analyzer. The built-in incubator holds 8–20 tubes of 10–12 mm at 25, 30 or 37 °C, stable to ±0.1 °C at 37 °C, with timers from 1 s to 99 min. Six filters span 340–700 nm, useful for enzyme kinetics and small immunoturbidimetric batches.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Clinics without a separate water bath can pre-warm and time tubes right on the analyzer. The built-in incubator holds 8–20 tubes of 10–12 mm at 25, 30 or 37 °C, stable to ±0.1 °C at 37 °C, with timers from 1 s to 99 min. Six filters span 340–700 nm, useful for enzyme kinetics and small immunoturbidimetric batches.
| Parameter | Value |
|---|---|
| Incubation positions 温育位数量 | 8–20 tubes of 10–12 mm diameter |
| Incubation temperature 温育温度 | 25, 30, 37 °C selectable |
| Temperature stability 温度稳定性 | ±0.1 °C at 37 °C |
| Timing range 计时范围 | 1 s to 99 min programmable |
| Wavelength range 波长范围 | 340–700 nm with 6 filters |
| Photometric range 光度范围 | 0–3.0 absorbance units |
| Calibration modes 校准方式 | One-point, two-point and kinetic factor |
| Interfaces 接口 | RS-232, USB, printer output |
| Power supply 电源 | AC 100–240 V, 50/60 Hz |
| Model No. | SEM-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
