金相与冶金试样制备设备
Photo for reference; configuration may vary by order.
Model No. SAR-0002 · Metallurgical Laboratory Equipment
光谱分析试样铣样机
Spark OES accuracy depends on the surface, so steel mill labs mill away scale and decarburized skin first. Carbide or HSS cutters at 1000–3000 rpm remove 0.2–2 mm per pass, leaving Ra about 0.8–3 µm on samples up to 80 mm diameter or 60 mm cube. Clamping is mechanical or pneumatic.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Spark OES accuracy depends on the surface, so steel mill labs mill away scale and decarburized skin first. Carbide or HSS cutters at 1000–3000 rpm remove 0.2–2 mm per pass, leaving Ra about 0.8–3 µm on samples up to 80 mm diameter or 60 mm cube. Clamping is mechanical or pneumatic.
| Parameter | Value |
|---|---|
| Cutter material 刀具材质 | Tungsten carbide or HSS |
| Cutter speed 刀具转速 | 1000–3000 rpm |
| Surface roughness achieved 表面粗糙度 | Ra about 0.8–3 µm |
| Maximum sample size 最大样品尺寸 | 80 mm diameter or 60 mm cube |
| Cutting depth 切削深度 | 0.2–2 mm per pass |
| Chip removal 排屑 | Vacuum or compressed air |
| Sample clamping 夹紧方式 | Mechanical or pneumatic vice |
| Power supply 电源 | 380 V, 50/60 Hz, three phase |
| Model No. | SAR-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
