黏度测试
Photo for reference; configuration may vary by order.
Model No. VTE-0003 · Lubricant Testing Equipment
斯塔宾格黏度计
R&D teams with scarce synthetic fluids, and labs that want viscosity index without two baths, use the Stabinger principle. About 0.5–1 mL gives dynamic viscosity over 0.2–20,000 mPa·s plus density over 0.65–3.0 g/cm³ in roughly 2–4 min. Temperature runs 15–105 °C at ±0.005 °C, and with added cooling extends down to −20 °C.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
R&D teams with scarce synthetic fluids, and labs that want viscosity index without two baths, use the Stabinger principle. About 0.5–1 mL gives dynamic viscosity over 0.2–20,000 mPa·s plus density over 0.65–3.0 g/cm³ in roughly 2–4 min. Temperature runs 15–105 °C at ±0.005 °C, and with added cooling extends down to −20 °C.
| Parameter | Value |
|---|---|
| Viscosity range 黏度范围 | 0.2–20,000 mPa·s |
| Viscosity repeatability 黏度重复性 | ≈ 0.1 % |
| Density range 密度范围 | 0.65–3.0 g/cm³ |
| Density accuracy 密度准确度 | ± 0.0005 g/cm³ |
| Temperature range 温度范围 | 15–105 °C (extended to −20 °C with cooling) |
| Temperature stability 温度稳定性 | ± 0.005 °C |
| Sample volume 样品量 | ≈ 0.5–1 mL |
| Measurement time 测量时间 | ≈ 2–4 min |
| Applicable method 适用方法 | ASTM D7042, ISO 23581 |
| Model No. | VTE-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
