片剂检测设备
Photo for reference; configuration may vary by order.
Model No. TAA-0003 · Pharmaceutical Laboratory Equipment
片剂崩解仪
For tablets, capsules and enteric products, disintegration is a quick release check. Baskets with typically No. 10 mesh stroke 55 ±2 mm at 30 ±1 cycles per minute in about 1000 mL beakers, held at 37 ±0.5 °C. Choose 1–3 basket positions; the bath heats from ambient to 50 °C.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
For tablets, capsules and enteric products, disintegration is a quick release check. Baskets with typically No. 10 mesh stroke 55 ±2 mm at 30 ±1 cycles per minute in about 1000 mL beakers, held at 37 ±0.5 °C. Choose 1–3 basket positions; the bath heats from ambient to 50 °C.
| Parameter | Value |
|---|---|
| Basket positions 吊篮位置 | 1–3 |
| Temperature range 温度范围 | ambient to 50 °C |
| Temperature stability 温度稳定性 | 37 ±0.5 °C |
| Stroke length 行程长度 | 55 ±2 mm |
| Stroke rate 频率 | 30 ±1 cycles per minute |
| Basket mesh 吊篮目数 | No. 10 mesh typical |
| Beaker volume 烧杯体积 | about 1000 mL |
| Power supply 电源 | 220 V, 50 Hz, about 0.5 kW |
| Model No. | TAA-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
