塑料热分析仪
Photo for reference; configuration may vary by order.
Model No. THA-0003 · Plastic Analysis Equipment
塑料热机械分析仪
For expansion coefficients of mouldings, shrinkage studies and softening points, this TMA tracks displacement to 15 nm. It runs from −150 to 600 °C with cooling, applies 0.001–2 N through expansion, penetration, tension or flexure probes, and accepts specimens typically 3–10 mm long. Temperature accuracy is ±0.5 °C.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
For expansion coefficients of mouldings, shrinkage studies and softening points, this TMA tracks displacement to 15 nm. It runs from −150 to 600 °C with cooling, applies 0.001–2 N through expansion, penetration, tension or flexure probes, and accepts specimens typically 3–10 mm long. Temperature accuracy is ±0.5 °C.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | −150 to 600 °C with cooling accessory |
| Heating rate 升温速率 | 0.1–50 °C/min |
| Displacement resolution 位移分辨率 | 15 nm |
| Force range 力值范围 | 0.001–2 N |
| Probe types 探头类型 | Expansion, penetration, tension, flexure |
| Specimen length 试样长度 | 3–10 mm typical |
| Temperature accuracy 温度准确度 | ±0.5 °C |
| Purge gas 吹扫气体 | Nitrogen or argon, 20–50 mL/min |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | THA-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
