连续梁与弯矩分配试验装置
Photo for reference; configuration may vary by order.
Model No. CBM-0001 · Structural Engineering Lab Equipment
测力支座两跨连续梁试验装置
Two-span beams are the simplest continuous case, and measuring all three reactions lets students check the three-moment equation directly. The 1200 mm beam rests on three knife-edge supports over 0–500 N load cells accurate to ±0.1% FS, set for equal or unequal spans. A 3-channel display reads 0.1 N with tare, and four sliding hangers take up to 100 N.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Two-span beams are the simplest continuous case, and measuring all three reactions lets students check the three-moment equation directly. The 1200 mm beam rests on three knife-edge supports over 0–500 N load cells accurate to ±0.1% FS, set for equal or unequal spans. A 3-channel display reads 0.1 N with tare, and four sliding hangers take up to 100 N.
| Parameter | Value |
|---|---|
| Total length 总长 | 1200 mm, 2 equal or unequal spans |
| Supports 支座 | 3 knife-edge supports on load cells |
| Load cell capacity 传感器量程 | 0–500 N each, ±0.1% FS |
| Display unit 显示单元 | 3-channel, 0.1 N resolution, tare |
| Test beam 试验梁 | Steel, 25 × 6 mm |
| Loading 加载方式 | 4 sliding hangers, 0–100 N |
| Deflection 挠度 | Dial gauge 0–25 mm, 0.01 mm |
| Power supply 电源 | 220 V, 50 Hz |
| Net weight 净重 | Approx. 32 kg |
| Model No. | CBM-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
