Model No. MIC-0001
High-Speed Microcentrifuge高速微量离心机
- Maximum speed
- 15,000–18,000 rpm
- Maximum RCF
- 18,000–21,000 x g
超速离心机
Ultracentrifuges
Photo for reference; configuration may vary by order.
Model No. ULT-0005 · Laboratory Centrifuges
Ultracentrifuge with Vertical and Near-Vertical Rotors
配垂直和近垂直转子的超速离心机
Plasmid banding in CsCl and viral banding finish far faster when the gradient path is short. This ultracentrifuge pairs vertical (0°) or near-vertical (7–10°) rotors with eight tubes of 5–39 mL each with speeds of 50,000–100,000 rpm. Isopycnic runs typically take 1–4 h. A slow ramp to 3,000 rpm protects gradients in sealed tubes.
- Maximum speed
- 50,000–100,000 rpm
- Maximum RCF
- 200,000–500,000 x g
- Rotor angle
- 0° (vertical) or 7–10° (near-vertical)
- Rotor capacity
- 8 x 5 mL to 8 x 39 mL
- Typical isopycnic run time
- 1–4 h
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
Plasmid banding in CsCl and viral banding finish far faster when the gradient path is short. This ultracentrifuge pairs vertical (0°) or near-vertical (7–10°) rotors with eight tubes of 5–39 mL each with speeds of 50,000–100,000 rpm. Isopycnic runs typically take 1–4 h. A slow ramp to 3,000 rpm protects gradients in sealed tubes.
Highlights
- Vertical or near-vertical rotor options
- Isopycnic runs in about 1–4 h
- 200,000–500,000 × g
- Slow initial ramp protects gradients
Applications
- Plasmid DNA banding in cesium chloride
- Virus and viral vector banding
- Lipoprotein fractionation
- Rapid isopycnic gradient separations
Specifications 技术参数
| Parameter | Value |
|---|---|
| Maximum speed 最高转速 | 50,000–100,000 rpm |
| Maximum RCF 最大离心力 | 200,000–500,000 x g |
| Rotor angle 转子角度 | 0° (vertical) or 7–10° (near-vertical) |
| Rotor capacity 转子容量 | 8 x 5 mL to 8 x 39 mL |
| Typical isopycnic run time 典型等密度运行时间 | 1–4 h |
| Temperature range 温度范围 | 0 to 40 °C |
| Tube type 管类型 | Sealed polyallomer or ultra-clear |
| Acceleration profiles 升速曲线 | Slow ramp to 3,000 rpm then full |
| Noise level 噪声 | ≤ 60 dB(A) |
| Power supply 电源 | 220 V, 50/60 Hz, 3–5 kW |
| Model No. | ULT-0005 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
IEC 61010-1
IEC 61010-2-020
IEC 61326-1
ISO 9001
EN 12469
GB 4793.1
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
5 models
Model No. ULT-0001
Floor-Standing Preparative Ultracentrifuge落地式制备型超速离心机
- Maximum speed
- 70,000–100,000 rpm
- Maximum RCF
- 500,000–800,000 x g
Model No. ULT-0002
Benchtop Ultracentrifuge台式超速离心机
- Maximum speed
- 90,000–150,000 rpm
- Maximum RCF
- up to approx. 1,000,000 x g
Model No. ULT-0003
Analytical Ultracentrifuge分析型超速离心机
- Maximum speed
- 60,000 rpm
- Maximum RCF
- approx. 260,000 x g
Model No. ULT-0004
Zonal and Continuous-Flow Ultracentrifuge区带和连续流超速离心机
- Maximum speed
- 25,000–50,000 rpm
- Maximum RCF
- approx. 50,000–100,000 x g