水质 TOC 分析仪
Photo for reference; configuration may vary by order.
Model No. TOC-0005 · Water Analysis Equipment
超纯水 TOC 分析仪
In semiconductor, power and pharmaceutical water loops, TOC is measured in micrograms. This reagent-free sensor oxidises with 185 nm UV and reads differential conductivity, with a lower limit of 0.5 µg/L and a top end of 1,000 µg/L, cycling every 1–5 min. It requires sample conductivity below 1 µS/cm and accepts 1–95 °C sample temperature. Tell us the loop and installation point for fitting advice.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
In semiconductor, power and pharmaceutical water loops, TOC is measured in micrograms. This reagent-free sensor oxidises with 185 nm UV and reads differential conductivity, with a lower limit of 0.5 µg/L and a top end of 1,000 µg/L, cycling every 1–5 min. It requires sample conductivity below 1 µS/cm and accepts 1–95 °C sample temperature. Tell us the loop and installation point for fitting advice.
| Parameter | Value |
|---|---|
| Oxidation method 氧化方式 | 185 nm UV, reagent-free |
| Measuring range 测量范围 | 0.5–1,000 µg/L TOC |
| Detection principle 检测原理 | Differential conductivity, temperature compensated |
| Sample conductivity 样品电导率 | < 1 µS/cm |
| Accuracy 准确度 | ± 0.5 µg/L or ± 5% of reading |
| Measurement cycle 测量周期 | 1–5 min |
| Sample flow 样品流量 | 20–100 mL/min |
| Sample temperature 样品温度 | 1–95 °C |
| Wetted materials 接液材质 | 316L electropolished stainless steel, PFA, quartz |
| Outputs 输出 | 4–20 mA, RS-485, relays |
| Model No. | TOC-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
