沥青延度仪
Photo for reference; configuration may vary by order.
Model No. BDT-0004 · Bitumen & Asphalt Testing Equipment
可调速沥青延度仪 1–100 mm/min
Research programmes often need speeds other than the standard 5 cm/min. This tester uses a servo motor and ball screw to pull three specimens at any speed from 1 to 100 mm/min to ± 1 %, over a 1500 mm stroke. The refrigerated bath runs 5–40 °C at ± 0.1 °C, and the touchscreen stores each test record.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Research programmes often need speeds other than the standard 5 cm/min. This tester uses a servo motor and ball screw to pull three specimens at any speed from 1 to 100 mm/min to ± 1 %, over a 1500 mm stroke. The refrigerated bath runs 5–40 °C at ± 0.1 °C, and the touchscreen stores each test record.
| Parameter | Value |
|---|---|
| Maximum elongation 最大拉伸长度 | 1500 mm |
| Pulling speed 拉伸速度 | 1–100 mm/min, stepless |
| Speed accuracy 速度精度 | ± 1 % |
| Specimens per test 每次试件数 | 3 |
| Temperature range 温度范围 | 5–40 °C, refrigerated |
| Temperature stability 控温精度 | ± 0.1 °C |
| Drive 驱动 | Servo motor and ball screw |
| Control 控制 | Touchscreen with test record storage |
| Power supply 电源 | 220 V, 50 Hz |
| Model No. | BDT-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
