工业质控样品前处理设备
Photo for reference; configuration may vary by order.
Model No. SAT-0002 · Industrial Quality Control Equipment
制样均质用振动盘式研磨仪
Pressed pellets, fused beads, ICP digests and wet chemistry all perform better on a homogeneous powder. This disc mill takes ≤ 10 mm feed and reaches 20–75 µm, depending on material, usually within 1–3 min. Grinding sets come in 50, 100 or 250 mL, in hardened steel, tungsten carbide, zirconia or agate.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Pressed pellets, fused beads, ICP digests and wet chemistry all perform better on a homogeneous powder. This disc mill takes ≤ 10 mm feed and reaches 20–75 µm, depending on material, usually within 1–3 min. Grinding sets come in 50, 100 or 250 mL, in hardened steel, tungsten carbide, zirconia or agate.
| Parameter | Value |
|---|---|
| Max feed size 最大进料粒度 | ≤ 10 mm |
| Final fineness 出料粒度 | 20–75 µm, material dependent |
| Grinding set volume 研磨罐容积 | 50 / 100 / 250 mL |
| Grinding set material 研磨件材质 | Hardened steel, tungsten carbide, zirconia, agate |
| Vibration frequency 振动频率 | Approx. 700–1500 rpm equivalent |
| Typical grinding time 典型研磨时间 | 1–3 min |
| Timer range 定时范围 | 1 s – 99 min |
| Motor power 电机功率 | 0.75–1.5 kW |
| Power supply 电源 | 220 V, 50/60 Hz |
| Weight 净重 | 80–120 kg |
| Model No. | SAT-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
