Cantilever Frame Island Bench悬臂框架中央实验台
- Overall length
- 1800–3600 mm
- Overall width
- 1500–1800 mm
靠墙实验台

Photo for reference; configuration may vary by order.
Model No. WAB-0004 · Laboratory Furniture
带集成水槽单元的靠墙实验台
Putting a sink into the wall run keeps glassware rinsing and reagent prep next to the benches that need water. Sink modules are 900 or 1200 mm wide with a bowl of about 500 × 400 × 250 mm in epoxy, PP or 304 stainless, a gooseneck mixer and optional pure water tap.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Putting a sink into the wall run keeps glassware rinsing and reagent prep next to the benches that need water. Sink modules are 900 or 1200 mm wide with a bowl of about 500 × 400 × 250 mm in epoxy, PP or 304 stainless, a gooseneck mixer and optional pure water tap.
| Parameter | Value |
|---|---|
| Sink unit width 水槽单元宽度 | 900 / 1200 mm |
| Sink size 水槽尺寸 | ≈500 × 400 × 250 mm |
| Sink material 水槽材质 | Epoxy / PP / stainless 304 |
| Tap type 龙头类型 | Gooseneck mixer, optional pure water |
| Waste pipe 排水管 | PP DN40–50 |
| Worktop material 台面材质 | Epoxy resin / stainless |
| Bench depth 台面深度 | 750 mm |
| Working height 工作高度 | 850–900 mm |
| Upstand 挡水边 | 100 mm |
| Cabinet material 柜体材质 | PP / moisture-proof steel |
| Model No. | WAB-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.