烟气分析仪
Photo for reference; configuration may vary by order.
Model No. SGA-0004 · Air Quality Monitoring Equipment
氧化锆氧分析仪
Trimming excess air on a boiler, kiln or reheating furnace starts with a reliable oxygen reading. This zirconia analyzer gives 0.01% resolution and T90 under 5 s, with 0–25% or 0–10% ranges. Probe length runs 300–1500 mm. Flue gas up to 600 °C is fine for the standard build; let us know if your duct is hotter.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Trimming excess air on a boiler, kiln or reheating furnace starts with a reliable oxygen reading. This zirconia analyzer gives 0.01% resolution and T90 under 5 s, with 0–25% or 0–10% ranges. Probe length runs 300–1500 mm. Flue gas up to 600 °C is fine for the standard build; let us know if your duct is hotter.
| Parameter | Value |
|---|---|
| Measurement principle 测量原理 | Zirconia solid electrolyte cell |
| Oxygen range 氧气量程 | 0–25%, 0–10% selectable |
| Resolution 分辨率 | 0.01% |
| Accuracy 准确度 | ±1% of reading or ±0.1% O2 |
| Response time 响应时间 | < 5 s (T90) |
| Cell temperature 电池温度 | 700–750 °C |
| Probe length 探头长度 | 300–1500 mm |
| Maximum flue temperature 最高烟气温度 | 600 °C (probe tip withstands up to 1400 °C) |
| Outputs 输出 | 4–20 mA, RS-485, alarm relay |
| Power supply 电源 | 220 VAC, 50 Hz |
| Reference gas 参比气 | Instrument air, 20.9% O2 |
| Model No. | SGA-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
