Model No. GRT-0001
Automatic Grease Cone Penetrometer自动润滑脂锥入度仪
- Penetration range
- 0–620 (0.1 mm)
- Resolution
- 0.1 mm
润滑脂测试
Grease Testing
润滑脂测试
Grease Testing — Lubricant Testing Equipment
Grease properties such as consistency, heat resistance and oil retention decide where it can be used. We manufacture automatic cone penetrometers, grease workers, dropping point apparatus, oxygen bomb oxidation testers, cone bleed testers and water washout testers. A typical grease QC bench starts with penetration and dropping point. Typical method references here are ASTM D6184, alongside IP 396 and ASTM D217.
6 models
Range code GRT
OEM available
Applicable standards
ASTM D217
ISO 2137
ASTM D566
ASTM D2265
IP 396
ASTM D942
ASTM D1264
ASTM D6184
How to specify
- Start with penetrometer, grease worker and dropping point for routine QC.
- Specify cone type and sample volume required by your penetration method.
- High-temperature greases may need the extended-range dropping point method.
Models in this range
6 models
Model No. GRT-0002
Grease Worker润滑脂工作器
- Sample mass
- ≈ 400 g per cup
- Stroke rate
- 60 ± 10 double strokes/min
Model No. GRT-0003
Grease Dropping Point Apparatus润滑脂滴点测定仪
- Temperature range
- Ambient to 400 °C
- Heating rate
- 1–1.5 °C/min near drop
Model No. GRT-0004
Grease Oxidation Stability Tester (Oxygen Bomb)润滑脂氧化安定性测定仪（氧弹法）
- Test temperature
- 99 °C (up to 180 °C option)
- Oxygen pressure
- ≈ 760 kPa (110 psi)
Model No. GRT-0005
Grease Oil Separation Tester (Cone Bleed)润滑脂分油测定仪（锥网法）
- Test temperature
- Ambient +10 to 200 °C (100 °C standard)
- Temperature uniformity
- ± 1 °C
Model No. GRT-0006
Grease Water Washout Tester润滑脂抗水淋性测定仪
- Spindle speed
- 600 ± 30 rpm
- Water temperature
- 38 °C or 79 °C (ambient to 90 °C)