浊度计
Photo for reference; configuration may vary by order.
Model No. TME-0005 · Water Testing Equipment
高量程背散射浊度计
When samples are too dense for nephelometric optics, such as sludge, mixed liquor or dredging slurry, a backscatter sensor is the practical answer. Reading light at 135–180 degrees, it covers up to 200 g/L suspended solids and reports in NTU or solids units. Order it as an immersion probe or flow-through sensor, with wiper or air-blast cleaning.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
When samples are too dense for nephelometric optics, such as sludge, mixed liquor or dredging slurry, a backscatter sensor is the practical answer. Reading light at 135–180 degrees, it covers up to 200 g/L suspended solids and reports in NTU or solids units. Order it as an immersion probe or flow-through sensor, with wiper or air-blast cleaning.
| Parameter | Value |
|---|---|
| Detection angle 检测角度 | 135–180 degrees backscatter |
| Range 量程 | 0–200 g/L suspended solids |
| Resolution 分辨率 | 1 mg/L at low range |
| Light source 光源 | Near-infrared LED |
| Calibration 校准 | NTU and suspended solids units |
| Cleaning 清洗 | Wiper or air blast |
| Sensor format 传感器形式 | Immersion or flow-through |
| Output signals 输出信号 | 4–20 mA, Modbus |
| Pressure rating 耐压 | Up to 6 bar immersion |
| Enclosure 防护等级 | IP68 sensor, IP65 controller |
| Model No. | TME-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
