Welcome to Liquid International — factory-direct lab & training equipment from China

LI-QUID LIQUID INTERNATIONAL 利奎德国际 · Shanghai
Inquiry Basket0

浊度计

Turbidity Meters

Model No. TME-0004 · Water Testing Equipment

Online Turbidity Analyzer for Water Treatment

水处理在线浊度分析仪

Filter performance, coagulant dosing and backwash timing all depend on a reliable continuous turbidity signal. This analyzer comes in 0–100 or 0–4000 NTU versions, mounted flow-through or immersed, with 0.001 NTU resolution at the low end. Let us know the sample point, cleaning preference (air blast, wiper or ultrasonic) and your control-system protocol.

Range
0–100 or 0–4000 NTU, model specific
Resolution
0.001 NTU at low range
Accuracy
±2 percent of reading or better
Measurement mode
Flow-through or immersion
Cleaning
Air blast, wiper or ultrasonic
Inquiry Now

Packing & Shipping

Place of originChina (dispatched from Shanghai)
BrandLiquid International / OEM on request
Export packingFumigation-free plywood case or reinforced carton
Loading portShanghai / Ningbo (others on request)
Payment termsT/T, L/C at sight (confirmed on quotation)
Trade termsEXW, FOB, CFR, CIF, DAP

Typical export terms — final terms are confirmed on the proforma invoice.

Product Description 产品描述

Filter performance, coagulant dosing and backwash timing all depend on a reliable continuous turbidity signal. This analyzer comes in 0–100 or 0–4000 NTU versions, mounted flow-through or immersed, with 0.001 NTU resolution at the low end. Let us know the sample point, cleaning preference (air blast, wiper or ultrasonic) and your control-system protocol.

Highlights

  • Two range versions: 0–100 NTU for filtrate, 0–4000 NTU for raw water
  • Three cleaning options to match fouling level at the sample point
  • 4–20 mA, Modbus or Ethernet output plus 2–4 alarm relays
  • Low sample demand of 0.2–1 L/min through the flow cell

Applications

  • Filtered water turbidity monitoring at treatment works
  • Coagulant dosing and settling control
  • Backwash initiation based on turbidity
  • Wastewater effluent and final discharge monitoring

Specifications 技术参数

ParameterValue
Range 量程 0–100 or 0–4000 NTU, model specific
Resolution 分辨率 0.001 NTU at low range
Accuracy 准确度 ±2 percent of reading or better
Measurement mode 测量方式 Flow-through or immersion
Cleaning 清洗 Air blast, wiper or ultrasonic
Output signals 输出信号 4–20 mA, Modbus, Ethernet
Alarm relays 报警继电器 2–4 configurable
Sample flow 样品流量 0.2–1 L/min
Enclosure 防护等级 IP65 or IP66
Calibration interval 校准间隔 Monthly or process dependent
Model No.TME-0004
Place of originChina (dispatched from Shanghai)

Applicable standards 适用标准

ISO 7027-1 ISO 7027-2 EPA 180.1 Standard Methods 2130 B ISO/IEC 17025

Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.

Packing & Shipping 包装与运输

Export packing

Fumigation-free plywood case or reinforced carton

Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.

Loading port

Shanghai / Ningbo (others on request)

Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.

Inquiry Now 索取报价

Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.

Products in this inquiry: Online Turbidity Analyzer for Water Treatment (TME-0004)

We reply within 24 hours (Beijing Time, UTC+8). Your details are used only to answer this inquiry.

Related products

6 models

Send your equipment list — receive a formal quotation within 24 hours

Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.