混凝土流动度台与自密实混凝土试验装置
Photo for reference; configuration may vary by order.
Model No. CFT-0001 · Concrete Testing Equipment
混凝土流动度台 700 × 700 mm（BS EN）
Flowing concrete with superplasticiser is classed by flow spread under the EN method. The 700 × 700 mm hinged top weighs 16 ± 0.5 kg and is lifted 40 mm and dropped 15 times by hand against a stop. A Ø 130/200 × 200 mm cone and a 40 × 40 mm timber tamping bar are included.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Flowing concrete with superplasticiser is classed by flow spread under the EN method. The 700 × 700 mm hinged top weighs 16 ± 0.5 kg and is lifted 40 mm and dropped 15 times by hand against a stop. A Ø 130/200 × 200 mm cone and a 40 × 40 mm timber tamping bar are included.
| Parameter | Value |
|---|---|
| Table top 台面 | 700 × 700 mm, 2 mm steel sheet on plywood |
| Drop height 提升高度 | 40 mm ± 1 mm |
| Top mass 台板质量 | 16 ± 0.5 kg |
| Cone 截锥筒 | Ø 130 mm top, Ø 200 mm bottom, 200 mm high |
| Markings 刻线 | Centre cross and Ø 210 mm circle |
| Tamping bar 捣棒 | 40 × 40 mm square timber |
| Operation 操作方式 | Manual lift handle with stop |
| Weight 重量 | Approx. 32 kg |
| Model No. | CFT-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
