CO2 培养箱
Photo for reference; configuration may vary by order.
Model No. CON-0003 · Cell Culture Equipment
直热式 CO2 培养箱
Teaching labs, diagnostic sites and groups with tight budgets often choose direct heat. With wall heaters and natural convection, there is no fan in the chamber to clean. It warms up from ambient in roughly 20–40 minutes, holds ±0.3–0.5 °C at 37 °C and is offered in 50–180 L sizes.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Teaching labs, diagnostic sites and groups with tight budgets often choose direct heat. With wall heaters and natural convection, there is no fan in the chamber to clean. It warms up from ambient in roughly 20–40 minutes, holds ±0.3–0.5 °C at 37 °C and is offered in 50–180 L sizes.
| Parameter | Value |
|---|---|
| Chamber volume 腔体容积 | 50–180 L (model dependent) |
| Temperature range 温度范围 | ambient +5 to 50 °C, set at 37 °C |
| Temperature uniformity 温度均一性 | within ±0.3–0.5 °C at 37 °C |
| CO2 range CO2 范围 | 0–20%, controlled at 5% |
| CO2 accuracy CO2 准确度 | within ±0.1–0.3% |
| Humidity 湿度 | above 90% relative humidity with water pan |
| Warm-up time 升温时间 | approx. 20–40 min from ambient |
| Airflow 气流方式 | Natural convection, fan-free |
| Stacking 叠放 | Two or three units with stacking frames |
| Dimensions (W x D x H) 外形尺寸（宽 x 深 x 高） | approx. 550 x 600 x 850 mm |
| Model No. | CON-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
