混凝土钻芯机与切割机
Photo for reference; configuration may vary by order.
Model No. CDM-0001 · Concrete Testing Equipment
立架式电动钻芯机 2.2 kW
Investigating a low cube result usually starts with 100 mm cores from the slab or wall in question. This 2.2 kW drill cuts 25–200 mm cores up to 400 mm deep per stroke at 450 or 900 r/min. The rig column tilts 0–45° and anchors to the surface, and a slip clutch protects the operator if the bit jams.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Investigating a low cube result usually starts with 100 mm cores from the slab or wall in question. This 2.2 kW drill cuts 25–200 mm cores up to 400 mm deep per stroke at 450 or 900 r/min. The rig column tilts 0–45° and anchors to the surface, and a slip clutch protects the operator if the bit jams.
| Parameter | Value |
|---|---|
| Motor power 电机功率 | 2.2 kW |
| Core diameter range 钻孔直径范围 | 25–200 mm |
| Spindle speeds 主轴转速 | Two speeds, 450 / 900 r/min |
| Drilling depth 钻孔深度 | Up to 400 mm per stroke |
| Rig stand 立架 | Steel column, 0–45° tilt, anchor base |
| Water cooling 冷却方式 | Water swivel with 10 L pressure tank |
| Overload protection 过载保护 | Mechanical slip clutch and thermal cut-out |
| Power 电源 | 220 V, 50 Hz |
| Weight 重量 | Approx. 22 kg (motor and stand) |
| Model No. | CDM-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
