旁压仪
Photo for reference; configuration may vary by order.
Model No. PMT-0005 · Geotechnical Field Testing Equipment
扁铲侧胀仪（DMT）
When settlement is the design issue, the flat dilatometer gives constrained modulus quickly from a CPT or drill rig. The 95 mm wide, 15 mm thick blade carries a 60 mm steel membrane, and the control unit reads A and B pressures on 0–1 and 0–6 MPa gauges. Tests are usually taken every 200 mm and yield ID, KD, ED, M and cu.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
When settlement is the design issue, the flat dilatometer gives constrained modulus quickly from a CPT or drill rig. The 95 mm wide, 15 mm thick blade carries a 60 mm steel membrane, and the control unit reads A and B pressures on 0–1 and 0–6 MPa gauges. Tests are usually taken every 200 mm and yield ID, KD, ED, M and cu.
| Parameter | Value |
|---|---|
| Blade dimensions 扁铲尺寸 | 95 mm wide, 15 mm thick, 18° edge |
| Membrane 膜片 | Steel, 60 mm diameter |
| Readings 读数 | A (lift-off) and B (1.1 mm expansion) |
| Control unit 控制单元 | Dual gauges 0–1 MPa and 0–6 MPa, buzzer |
| Pressure source 压力源 | Nitrogen or CO2 bottle |
| Pushing 压入方式 | CPT rig or drill rig, 20 mm/s |
| Test interval 测试间隔 | Every 200 mm |
| Output 输出结果 | ID, KD, ED, M, cu |
| Standards 执行标准 | ASTM D6635, BS EN ISO 22476-11 |
| Weight 重量 | About 25 kg (blade, unit and cable) |
| Model No. | PMT-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
