接触角测量仪
Photo for reference; configuration may vary by order.
Model No. CAM-0004 · Surface Analysis Instruments
纤维与粉体动态润湿用力学张力仪
Single fibres, powders and filter media cannot hold a sessile drop, so wetting is measured by force. This tensiometer uses a 0.01 mg balance of 210 g capacity with a stage moving 0.1–500 mm/min at 0.1 µm resolution. It handles fibres of 5–500 µm and surface tension of 1–2000 mN/m to ±0.1 mN/m. Temperature control covers 10–90 °C.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Single fibres, powders and filter media cannot hold a sessile drop, so wetting is measured by force. This tensiometer uses a 0.01 mg balance of 210 g capacity with a stage moving 0.1–500 mm/min at 0.1 µm resolution. It handles fibres of 5–500 µm and surface tension of 1–2000 mN/m to ±0.1 mN/m. Temperature control covers 10–90 °C.
| Parameter | Value |
|---|---|
| Balance resolution 天平分辨率 | 0.01 mg |
| Balance capacity 天平量程 | 210 g |
| Stage speed 样品台速度 | 0.1–500 mm/min |
| Position resolution 位置分辨率 | 0.1 µm |
| Surface tension range 表面张力范围 | 1–2000 mN/m |
| Surface tension accuracy 表面张力精度 | ±0.1 mN/m |
| Temperature control 温度控制 | 10–90 °C, ±0.1 °C |
| Fiber diameter range 纤维直径范围 | 5–500 µm |
| Methods 方法 | Wilhelmy, Washburn, du Noüy ring |
| Sample vessel volume 样品容器体积 | 10–100 mL |
| Model No. | CAM-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
