塑料熔体流动分析仪
Photo for reference; configuration may vary by order.
Model No. MFA-0001 · Plastic Analysis Equipment
重量法熔体流动速率分析仪
When a supplier and converter disagree on a melt flow result, the classic weigh-the-cut method is the reference. This analyser holds 50–400 °C to ±0.2 °C, uses the standard 9.55 mm bore and Ø 2.095 mm die, and carries weights from 0.325 to 21.6 kg. Pair it with a balance reading 0.1 mg.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
When a supplier and converter disagree on a melt flow result, the classic weigh-the-cut method is the reference. This analyser holds 50–400 °C to ±0.2 °C, uses the standard 9.55 mm bore and Ø 2.095 mm die, and carries weights from 0.325 to 21.6 kg. Pair it with a balance reading 0.1 mg.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | 50–400 °C |
| Temperature accuracy 温度准确度 | ±0.2 °C |
| Load weights 负荷砝码 | 0.325 / 1.2 / 2.16 / 5 / 10 / 21.6 kg |
| Die dimensions 口模尺寸 | Ø 2.095 mm × 8.000 mm |
| Barrel bore 料筒内径 | 9.55 mm |
| Cut interval 切样间隔 | 10–60 s, operator controlled |
| Sample mass per test 每次样品量 | 3–8 g |
| Balance resolution 天平分度值 | 0.1 mg recommended |
| Display 显示方式 | Digital PID temperature controller |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | MFA-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
