塑料熔体流动分析仪
Photo for reference; configuration may vary by order.
Model No. MFA-0004 · Plastic Analysis Equipment
热塑性塑料熔体密度测定仪
Two lots with the same MFR can still differ in MVR if filler loading has drifted, and melt density explains why. Combining 0.01 mm piston tracking with a 0.1 mg balance, this analyser reports melt density from 0.6 to 1.5 g/cm³ with typical uncertainty of ±0.005 g/cm³. Temperature range is 50–400 °C.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Two lots with the same MFR can still differ in MVR if filler loading has drifted, and melt density explains why. Combining 0.01 mm piston tracking with a 0.1 mg balance, this analyser reports melt density from 0.6 to 1.5 g/cm³ with typical uncertainty of ±0.005 g/cm³. Temperature range is 50–400 °C.
| Parameter | Value |
|---|---|
| Melt density range 熔体密度范围 | 0.6–1.5 g/cm³ typical |
| Displacement resolution 位移分辨率 | 0.01 mm |
| Temperature range 温度范围 | 50–400 °C |
| Temperature accuracy 温度准确度 | ±0.2 °C |
| Balance resolution 天平分度值 | 0.1 mg |
| Load weights 负荷砝码 | 2.16 / 5 / 10 / 21.6 kg |
| Die dimensions 口模尺寸 | Ø 2.095 mm × 8.0 mm |
| Measurement uncertainty 测量不确定度 | ±0.005 g/cm³ typical |
| Data output 数据输出 | MFR, MVR and melt density per test |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | MFA-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
