油液状态监测设备
Photo for reference; configuration may vary by order.
Model No. OCM-0002 · Oil Testing Equipment
管路内油液颗粒监测仪
Injection moulding presses, steel mill hydraulics and flushing carts all benefit from seeing contamination as it happens. This monitor samples a bypass flow of 50–400 mL/min and outputs ISO 4406 codes spanning 7/5/3 to 25/23/21 at 4, 6 and 14 µm(c). It tolerates 350 bar and oil up to 350 mm²/s; pick 4–20 mA, CAN, Modbus or Ethernet output.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Injection moulding presses, steel mill hydraulics and flushing carts all benefit from seeing contamination as it happens. This monitor samples a bypass flow of 50–400 mL/min and outputs ISO 4406 codes spanning 7/5/3 to 25/23/21 at 4, 6 and 14 µm(c). It tolerates 350 bar and oil up to 350 mm²/s; pick 4–20 mA, CAN, Modbus or Ethernet output.
| Parameter | Value |
|---|---|
| Particle size channels 粒径通道 | ≥ 4, 6, 14 µm(c) |
| Cleanliness code range 清洁度等级范围 | ISO 4406 7/5/3 to 25/23/21 |
| Flow rate 流量 | 50–400 mL/min |
| Operating pressure 工作压力 | ≤ 350 bar |
| Oil viscosity range 油液黏度范围 | ≤ 350 mm²/s |
| Oil temperature 油温 | −20 to 80 °C |
| Output 输出 | 4–20 mA, CAN, Modbus, Ethernet |
| Ingress protection 防护等级 | IP67 |
| Supply voltage 供电电压 | 9–36 V DC |
| Model No. | OCM-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
