Model No. OCM-0001
Online Oil Moisture Sensor在线油液水分传感器
- Measurement range
- 0–100 % relative saturation
- Accuracy
- ± 3 % RS
油液状态监测设备
Oil Condition Monitoring
油液状态监测设备
Oil Condition Monitoring — Oil Testing Equipment
Online sensors let maintenance teams watch oil health continuously instead of waiting for lab results. We offer moisture sensors, inline particle monitors, wear debris sensors, multi-parameter oil quality sensors and portable analysis kits for spot checks. Choice depends on the machine, the failure modes you care about and how data reaches your control system. Common inquiry references include IEC 60079-0, plus ISO 13374 or ISO 4406 where required.
5 models
Range code OCM
OEM available
Applicable standards
ISO 4406
ISO 4407
ISO 11171
ISO 17359
ISO 13374
ASTM D7647
ASTM D7917
IEC 60079-0
How to specify
- Tell us line pressure, flow and oil type for each sensor location.
- Confirm output signals and protocols needed by your PLC or SCADA.
- Hazardous-area sites should request explosion-protected versions in the inquiry.
Models in this range
5 models
Model No. OCM-0002
Inline Oil Particle Monitor管路内油液颗粒监测仪
- Particle size channels
- ≥ 4, 6, 14 µm(c)
- Cleanliness code range
- ISO 4406 7/5/3 to 25/23/21
Model No. OCM-0003
Online Wear Debris Sensor在线磨损碎屑传感器
- Detection threshold, ferrous
- ≈ 50–100 µm
- Detection threshold, non-ferrous
- ≈ 200–300 µm
Model No. OCM-0004
Multi-Parameter Online Oil Quality Sensor多参数在线油品质量传感器
- Viscosity range
- 1–1000 mPa·s
- Viscosity accuracy
- ± 5 % of reading
Model No. OCM-0005
Portable Oil Condition Analysis Kit便携式油液状态分析套件
- Water detection
- ≈ 500 ppm or 0–100 % RS
- Viscosity range
- 10–1000 mm²/s at 40 °C