玻璃珠灭菌器
Photo for reference; configuration may vary by order.
Model No. GBS-0005 · Laboratory Sterilization Equipment
大容量玻璃珠灭菌器
Long forceps, spatulas and heavier tools need a deeper, bigger bead bath. This large-capacity sterilizer has a 70-100 mm well, 90-150 mm deep, holding 300-800 g of beads at 250-300 °C. It takes instruments up to 250 mm long, recovers 5-15 s after insertion and uses a PID controller with digital display.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Long forceps, spatulas and heavier tools need a deeper, bigger bead bath. This large-capacity sterilizer has a 70-100 mm well, 90-150 mm deep, holding 300-800 g of beads at 250-300 °C. It takes instruments up to 250 mm long, recovers 5-15 s after insertion and uses a PID controller with digital display.
| Parameter | Value |
|---|---|
| Working temperature 工作温度 | 250-300 °C |
| Well diameter 槽体直径 | 70-100 mm |
| Well depth 槽体深度 | 90-150 mm |
| Bead capacity 玻璃珠容量 | 300-800 g |
| Recovery time after insertion 插入后恢复时间 | 5-15 s |
| Warm-up time to 250 °C 升温至 250 °C 时间 | 30-50 min |
| Maximum instrument length 最大器械长度 | Up to 250 mm |
| Temperature control 温度控制 | PID controller with digital display |
| Safety devices 安全装置 | Over-temperature cut-out, insulated lid interlock option |
| Power supply 电源 | 220 V, 50 Hz, 300-600 W |
| Model No. | GBS-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
