玻璃珠灭菌器
Photo for reference; configuration may vary by order.
Model No. GBS-0001 · Laboratory Sterilization Equipment
台式玻璃珠灭菌器
Between steps at a micro or animal-research bench, forceps and loops can be sterilised in seconds without a flame. This single-well unit heats 100-200 g of 1.5-4 mm beads to 250 °C nominal in 20-30 min. The well is 40-60 mm wide and 40-80 mm deep, and a typical hold is 10-30 s per instrument.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Between steps at a micro or animal-research bench, forceps and loops can be sterilised in seconds without a flame. This single-well unit heats 100-200 g of 1.5-4 mm beads to 250 °C nominal in 20-30 min. The well is 40-60 mm wide and 40-80 mm deep, and a typical hold is 10-30 s per instrument.
| Parameter | Value |
|---|---|
| Working temperature 工作温度 | 250 °C nominal |
| Temperature control 温度控制 | Bimetallic or PID thermostat |
| Warm-up time to 250 °C 升温至 250 °C 时间 | 20-30 min |
| Well diameter 槽体直径 | 40-60 mm |
| Well depth 槽体深度 | 40-80 mm |
| Glass bead size 玻璃珠粒径 | 1.5-4 mm |
| Bead capacity 玻璃珠容量 | 100-200 g |
| Typical hold time 典型保持时间 | 10-30 s per instrument |
| Power supply 电源 | 220 V, 50 Hz, 100-300 W |
| Housing material 外壳材质 | Powder-coated steel, stainless well |
| Model No. | GBS-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
