快速含水率测定仪
Photo for reference; configuration may vary by order.
Model No. RMM-0004 · Soil Testing Equipment
大样量电石法含水率测定仪 200 g
A 26 g sample is not representative of a granular sub-base with 20 mm stones. This tester takes up to 200 g of material with particles to about 20 mm, using four 50 mm steel balls to break it down. Moisture from 0 to 20% reads on a 150 mm dial, using about 40 g of reagent per test.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
A 26 g sample is not representative of a granular sub-base with 20 mm stones. This tester takes up to 200 g of material with particles to about 20 mm, using four 50 mm steel balls to break it down. Moisture from 0 to 20% reads on a 150 mm dial, using about 40 g of reagent per test.
| Parameter | Value |
|---|---|
| Sample mass 试样质量 | Up to 200 g |
| Maximum particle size 最大粒径 | Approx. 20 mm |
| Moisture range 含水率范围 | 0–20% wet basis |
| Gauge 压力表 | 150 mm dial |
| Pressure vessel 压力容器 | Steel, with screw cap |
| Grinding balls 研磨钢球 | Four, 50 mm steel |
| Reagent per test 每次试剂用量 | Approx. 40 g |
| Weight 重量 | Approx. 12 kg in case |
| Model No. | RMM-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
