轮转式切片机
Photo for reference; configuration may vary by order.
Model No. RMI-0001 · Histology Equipment
手动轮转式切片机
Teaching labs, vet pathology and small research groups often prefer a handwheel microtome for its control and low cost. It cuts 1–60 µm in 1 µm steps, trims at 10 or 30 µm and accepts specimens up to about 50 × 40 mm with a stroke of about 60 mm. Retraction is about 60 µm per stroke.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Teaching labs, vet pathology and small research groups often prefer a handwheel microtome for its control and low cost. It cuts 1–60 µm in 1 µm steps, trims at 10 or 30 µm and accepts specimens up to about 50 × 40 mm with a stroke of about 60 mm. Retraction is about 60 µm per stroke.
| Parameter | Value |
|---|---|
| Section thickness range 切片厚度范围 | 1–60 µm |
| Thickness increment 厚度增量 | 1 µm |
| Trimming feed 修块进给 | 10 µm and 30 µm |
| Maximum specimen size 最大标本尺寸 | about 50 × 40 mm |
| Specimen stroke 标本行程 | about 60 mm |
| Retraction 回缩 | about 60 µm per stroke |
| Blade type 刀片类型 | Disposable low-profile or high-profile |
| Drive 驱动方式 | Manual handwheel |
| Weight 重量 | about 30–40 kg |
| Model No. | RMI-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
