射钉法混凝土强度检测仪
Photo for reference; configuration may vary by order.
Model No. WPS-0005 · Non-Destructive Testing for Concrete & Structures
贯入式砌筑砂浆强度检测仪
Masonry assessments often hinge on joint mortar strength, which cannot be cored. This tester drives a Ø3.5 mm pin into the bed joint with an 800 N spring over a 20 mm stroke. Penetration is read to 0.01 mm on a digital gauge, covering mortars of about 0.4–16 MPa from 16 points per test area.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Masonry assessments often hinge on joint mortar strength, which cannot be cored. This tester drives a Ø3.5 mm pin into the bed joint with an 800 N spring over a 20 mm stroke. Penetration is read to 0.01 mm on a digital gauge, covering mortars of about 0.4–16 MPa from 16 points per test area.
| Parameter | Value |
|---|---|
| Drive 驱动方式 | Spring, manual loading lever |
| Penetration force 贯入力 | 800 N |
| Test pin 测钉 | Ø3.5 mm hardened steel |
| Working stroke 工作行程 | 20 mm |
| Depth gauge 贯入深度测量表 | Digital, 0–20 mm, 0.01 mm resolution |
| Strength range 适用强度范围 | About 0.4–16 MPa mortar |
| Readings per area 每测区测点 | 16 points |
| Weight 重量 | About 3 kg |
| Model No. | WPS-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
