蛋白质纯化系统
Photo for reference; configuration may vary by order.
Model No. PRP-0004 · Protein Analysis Equipment
体积排阻层析系统
Aggregate quantification and buffer exchange both depend on clean size-based separation. This SEC system covers about 1–700 kDa by resin, using 300 mm analytical columns (100–600 mm available) at 0.3–1.0 mL/min and up to about 2 MPa. Runs take about 20–40 min with 280 nm UV, resolving monomer and dimer, from 10–500 µL samples.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Aggregate quantification and buffer exchange both depend on clean size-based separation. This SEC system covers about 1–700 kDa by resin, using 300 mm analytical columns (100–600 mm available) at 0.3–1.0 mL/min and up to about 2 MPa. Runs take about 20–40 min with 280 nm UV, resolving monomer and dimer, from 10–500 µL samples.
| Parameter | Value |
|---|---|
| Separation range 分离范围 | approx. 1–700 kDa (resin dependent) |
| Column length 柱长 | 300 mm analytical, 100–600 mm available |
| Flow rate 流速 | 0.3–1.0 mL/min |
| Maximum pressure 最高压力 | approx. 2 MPa |
| Run time 运行时间 | approx. 20–40 min |
| Resolution 分辨率 | monomer and dimer resolved (typical) |
| Detection 检测方式 | UV absorbance at 280 nm |
| Sample volume 样品体积 | 10–500 µL (1–5% of column volume) |
| Buffer consumption 缓冲液消耗 | approx. 50–150 mL per run |
| Dimensions (W x D x H) 外形尺寸（宽 x 深 x 高） | approx. 400 x 400 x 450 mm |
| Model No. | PRP-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
