Horizontal Steam Sterilizer with Built-In Steam Generator自带蒸汽发生器的卧式蒸汽灭菌器
- Chamber volume
- 100-1,000 L
- Working temperature
- 105-134 °C
蒸汽灭菌器

Photo for reference; configuration may vary by order.
Model No. STS-0002 · Laboratory Sterilization Equipment
密封液体负载蒸汽-空气混合灭菌器
Sealed bottles, bags and ampoules burst in an ordinary steam cycle; this sterilizer balances them with filtered air. It runs 105-121 °C with 0-0.25 MPa counter-pressure above steam, ±1-2 °C uniformity and 15-40 min holds. Chambers are 150-2,000 L in SUS316L, using oil-free air at 0.4-0.6 MPa and controlled venting or a cooling coil.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Sealed bottles, bags and ampoules burst in an ordinary steam cycle; this sterilizer balances them with filtered air. It runs 105-121 °C with 0-0.25 MPa counter-pressure above steam, ±1-2 °C uniformity and 15-40 min holds. Chambers are 150-2,000 L in SUS316L, using oil-free air at 0.4-0.6 MPa and controlled venting or a cooling coil.
| Parameter | Value |
|---|---|
| Working temperature 工作温度 | 105-121 °C |
| Chamber volume 腔体容积 | 150-2,000 L |
| Counter-pressure range 反压范围 | 0-0.25 MPa above steam pressure |
| Temperature uniformity 温度均匀性 | ±1-2 °C with air mixing |
| Typical hold time 典型保持时间 | 15-40 min |
| Air supply 压缩空气 | Filtered, 0.4-0.6 MPa, oil-free |
| Cooling method 冷却方式 | Controlled pressure venting or cooling coil |
| Chamber material 腔体材质 | SUS316L stainless steel |
| Controls 控制系统 | PLC with ramp programming and cycle records |
| Door type 门类型 | Slide or swing door with safety interlock |
| Power supply 电源 | 380 V, 50 Hz, 3 phase |
| Model No. | STS-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.