Model No. SPL-0001
Jones Riffle Splitter琼斯二分器
- Number of chutes
- 8–20, even number
- Chute width
- 2.5–3 times top size
矿石缩分器
Splitters
矿石缩分器
Splitters — Mining Laboratory Equipment
Reducing a large sample without bias is a core skill in mining labs. We supply Jones riffle splitters, Vezin dividers, rotary sample dividers, rotary cone splitters and slurry splitters for plant samples. Choose by sample state, mass and the accuracy you need. Rotary designs give the best repeatability for critical work. Typical method references here are IEC 61010-1, alongside ASTM C702 and ISO 3082.
5 models
Range code SPL
OEM available
Applicable standards
ISO 3082
ISO 12743
ASTM E877
ASTM C702
GB/T 2007
IEC 61010-1
How to specify
- Match riffle chute width to the largest particle in your sample.
- Choose slurry splitters for flotation and plant circuit samples.
- Rotary dividers suit reference and umpire samples where bias matters.
Models in this range
5 models
Model No. SPL-0002
Vezin Sample Divider维津缩分器
- Applicable top size
- Up to 30–40 mm depending on model
- Collected fraction
- Adjustable, commonly 1/8 to 1/30
Model No. SPL-0003
Rotary Sample Divider for Mineral Samples矿物旋转缩分器
- Number of vessels
- 6–20
- Applicable top size
- ≤ 5 mm, best below 2 mm
Model No. SPL-0005
Laboratory Slurry Sample Splitter实验室矿浆缩分器
- Applicable particle size
- ≤ 3 mm
- Split ratio
- Adjustable, about 1/10 to 1/100