沥青混合料车辙试验仪
Photo for reference; configuration may vary by order.
Model No. WTT-0004 · Bitumen & Asphalt Testing Equipment
动稳定度自动车辙试验仪
Many Asian and Middle Eastern specifications express rut resistance as dynamic stability in passes per mm. This tester loads a 300 × 300 × 50 mm slab through a 200 mm rubber wheel at 0.7 ± 0.05 MPa and 42 ± 1 passes/min, at up to 70 °C held to ± 0.5 °C. It reads deformation to 0.01 mm and prints dynamic stability.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Many Asian and Middle Eastern specifications express rut resistance as dynamic stability in passes per mm. This tester loads a 300 × 300 × 50 mm slab through a 200 mm rubber wheel at 0.7 ± 0.05 MPa and 42 ± 1 passes/min, at up to 70 °C held to ± 0.5 °C. It reads deformation to 0.01 mm and prints dynamic stability.
| Parameter | Value |
|---|---|
| Wheel 试验轮 | Solid rubber, 200 mm diameter, 50 mm wide |
| Contact pressure 接地压强 | 0.7 ± 0.05 MPa |
| Passes 往返频率 | 42 ± 1 passes/min |
| Travel 行程 | 230 ± 10 mm |
| Chamber temperature 箱体温度 | Ambient to 70 °C, ± 0.5 °C |
| Specimen 试件 | Slab 300 × 300 × 50 mm |
| Deformation sensor 变形传感器 | Displacement sensor, 0.01 mm |
| Output 输出 | Dynamic stability, passes/mm, printed |
| Power supply 电源 | 380 V, 50 Hz, 3-phase |
| Model No. | WTT-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
