Model No. ERC-0002
Force Ductility Tester with Load Cell测力延度仪（带力传感器）
- Load cell range
- 0–200 N
- Load resolution
- 0.1 N
沥青弹性恢复与测力延度仪
Elastic Recovery & Force Ductility Testers
Photo being updated
Photo for reference; configuration may vary by order.
Model No. ERC-0001 · Bitumen & Asphalt Testing Equipment
Digital Elastic Recovery Ductilometer
数显沥青弹性恢复延度仪
Elastic recovery needs the stretch stopped at an exact length, then a timed hold before the threads are measured. This ductilometer pulls three specimens at 5 cm/min and stops automatically at 10 cm or 20 cm, with 30 and 60 min hold timers and a digital length display to 0.1 mm. The refrigerated bath runs 5–40 °C at ± 0.1 °C.
- Maximum elongation
- 1500 mm
- Pulling speed
- 5 cm/min
- Specimens per test
- 3
- Temperature range
- 5–40 °C, refrigerated
- Temperature stability
- ± 0.1 °C
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
Elastic recovery needs the stretch stopped at an exact length, then a timed hold before the threads are measured. This ductilometer pulls three specimens at 5 cm/min and stops automatically at 10 cm or 20 cm, with 30 and 60 min hold timers and a digital length display to 0.1 mm. The refrigerated bath runs 5–40 °C at ± 0.1 °C.
Highlights
- Automatic stop at 10 or 20 cm
- 30 and 60 min recovery timers
- Refrigerated 5–40 °C bath
- 0.1 mm digital length readout
Applications
- Elastic recovery of SBS modified bitumen
- PMB specification compliance
- Ductility at 5 °C and 25 °C
- Modified emulsion residues
Specifications 技术参数
| Parameter | Value |
|---|---|
| Maximum elongation 最大拉伸长度 | 1500 mm |
| Pulling speed 拉伸速度 | 5 cm/min |
| Specimens per test 每次试件数 | 3 |
| Temperature range 温度范围 | 5–40 °C, refrigerated |
| Temperature stability 控温精度 | ± 0.1 °C |
| Stop and hold 停止保持 | Automatic stop at 10 cm or 20 cm |
| Recovery timer 恢复计时 | 30 min and 60 min hold timers |
| Length display 长度显示 | Digital, 0.1 mm |
| Power supply 电源 | 220 V, 50 Hz |
| Model No. | ERC-0001 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
ASTM D6084
AASHTO T 301
BS EN 13398
BS EN 13589
BS EN 13703
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
6 models
Model No. ERC-0003
Computerised Force Ductility and Elastic Recovery Tester计算机控制测力延度及弹性恢复试验仪
- Load cell range
- 0–500 N
- Load resolution
- 0.01 N
Model No. ERC-0004
Dual-Station Force Ductility Tester双工位测力延度仪
- Load cell range
- 2 × 0–200 N
- Load resolution
- 0.1 N
Model No. ERC-0005
Elastic Recovery Mould Set弹性恢复试模套装
- Mould types
- Hourglass and straight-sided inserts
- Material
- Brass
Model No. GYC-0001
Superpave Gyratory Compactor 150 mm Servo-Electric伺服电动Superpave旋转压实仪 150 mm
- Mould diameter
- 150 mm
- Vertical pressure
- 600 ± 18 kPa, adjustable 200–1000 kPa
Model No. MCP-0001
Manual Marshall Compaction Hammer with Pedestal手动马歇尔击实锤（带基座）
- Hammer mass
- 4536 ± 9 g
- Drop height
- 457 ± 1.5 mm