Model No. ERC-0001
Digital Elastic Recovery Ductilometer数显沥青弹性恢复延度仪
- Maximum elongation
- 1500 mm
- Pulling speed
- 5 cm/min
沥青弹性恢复与测力延度仪
Elastic Recovery & Force Ductility Testers
Photo being updated
Photo for reference; configuration may vary by order.
Model No. ERC-0005 · Bitumen & Asphalt Testing Equipment
Elastic Recovery Mould Set
弹性恢复试模套装
ASTM D6084 and BS EN 13398 use different mould shapes, and labs reporting to both need each. This set gives three brass moulds of 10 × 10 mm cross-section with hourglass and straight-sided inserts and base plates, plus a hot knife for trimming and scissors for cutting the thread.
- Mould types
- Hourglass and straight-sided inserts
- Material
- Brass
- Cross-section
- 10 × 10 mm
- Moulds per set
- 3 moulds with base plates
- Clip spacing
- Per ASTM D6084 and BS EN 13398
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
ASTM D6084 and BS EN 13398 use different mould shapes, and labs reporting to both need each. This set gives three brass moulds of 10 × 10 mm cross-section with hourglass and straight-sided inserts and base plates, plus a hot knife for trimming and scissors for cutting the thread.
Highlights
- Hourglass and straight-sided inserts
- 10 × 10 mm cross-section
- Three moulds with base plates
- Hot knife and scissors included
Applications
- Elastic recovery specimen casting
- Switching between ASTM and EN methods
- Replacing worn moulds
- Parallel specimen preparation
Specifications 技术参数
| Parameter | Value |
|---|---|
| Mould types 试模类型 | Hourglass and straight-sided inserts |
| Material 材质 | Brass |
| Cross-section 截面 | 10 × 10 mm |
| Moulds per set 每套数量 | 3 moulds with base plates |
| Clip spacing 夹具间距 | Per ASTM D6084 and BS EN 13398 |
| Accessories 附件 | Hot knife and scissors |
| Release agent 隔离剂 | Glycerin-talc mix recommended |
| Compliance 执行标准 | ASTM D6084, BS EN 13398 |
| Model No. | ERC-0005 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
ASTM D6084
AASHTO T 301
BS EN 13398
BS EN 13589
BS EN 13703
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
6 models
Model No. ERC-0002
Force Ductility Tester with Load Cell测力延度仪（带力传感器）
- Load cell range
- 0–200 N
- Load resolution
- 0.1 N
Model No. ERC-0003
Computerised Force Ductility and Elastic Recovery Tester计算机控制测力延度及弹性恢复试验仪
- Load cell range
- 0–500 N
- Load resolution
- 0.01 N
Model No. ERC-0004
Dual-Station Force Ductility Tester双工位测力延度仪
- Load cell range
- 2 × 0–200 N
- Load resolution
- 0.1 N
Model No. GYC-0005
Gyratory Internal Angle Validation Kit旋转压实仪内角校验装置
- Measured parameter
- Internal angle of gyration
- Angle range
- 0.8–1.5°
Model No. MCP-0005
Dual-Hammer Automatic Marshall Compactor双锤自动马歇尔击实仪
- Hammers
- 2, each 4536 ± 9 g
- Drop height
- 457 ± 1.5 mm